Operation Manual for Model MP-2986 Display and Keypad for use with TC-36-25 RS232 Temperature Controller May 29, 2008 Drawing #4712 R
2Table of Contents General Description ...
3 General Description The MP-2986 Display and Keypad accessory can be used with the TC-36-25 RS232 temperature controller. Normally, the controller
4Setup Instructions 1. Make sure the controller is not powered. Connect the flat-flex cable to JP2 on the MP-2986 and JP3 on the TC-36-25 RS232. Ma
5 2. Connect the un-powered controller to the un-powered computer (see the controller manual for further details) first, and then power up the contr
6 Operating Instructions 1. The right-hand button is the MENU button, which toggles between the ACTUAL TEMP and the SET TEMP mode. When the bottom
7 MP-2986 Layout ACTUAL TEMPLEDSET TEMPLEDDECREASE SET TEMP BUTTONMENU BUTTONINCREASE SET TEMP BUTTON
8MP-2986 Dimensions 82.676.249.555.9Ø3.0542.0422.9961.092X 72.9014.2233.4040.1323.7520.32 X 53.344X Ø3.052X Ø6.353X Ø10.924-40 NUT AND SCREWOR M
Commentaires sur ces manuels